Number of channels 1 Amplifier class D Typical power in 4 ohm 550 W Typical power in 2 ohm 900 W Typical power in 1 ohm 1600 W Mono bridge mode 4 ohm N/A Damping factor > 100 S/N ratio, A-weighted > 100 dB Frequency range 15 - 160 Hz Input sensitivity 0,15 - 5 V Input impedance > 10 kohm Input impedance, high level 100 ohm High pass filter 15-50 Hz / 24 dB slope Low pass filter 15-150 Hz / 24 dB slope Phase control for subwoofers 0-180 grader kont. variabel Grand bass filter 0-+18 dB@45 Hz Remote base level control 1 High level input with auto start 1 Integrated fan 1 Power consumption (idle) 2 A Power consumption (max) 160 A Rec. power cable Minimum 2AWG / 33 mm2 Fuses 4 x 40 A Dimension (W x D x H) 70 x 473 x 268 mm (2,92 x 18,62 x 10,55 inch) Weight 6,4 kg ( 14,3 lb)
MS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion. Mode : AB Number of channels : 5 Nominal power in 4 ohm : 4 x 50 Watt + 1 x 250 Watt on mono channel Typical power in 4 ohm : 4 x 70 Watt + 1 x 265 Watt on mono channel Typical power in 2 ohm : 4 x 100 Watt + 1 x 365 Watt on mono channel Frequency range : 10 Hz - 50 kHz S / N ratio, A-weighted : > 100 dB Damping factor : > 200 Input impedance, low level input : > 10 kohm Input impedance, high level input : 330 ohm High level input with auto start function : Yes nput sensitivity, variable : 0,5 - 8 V Filter configuration channels 1&2: HP: 50-140 Hz. LP: 250-700 Hz (2,5 kHz- 7 kHz with x10 switch) Filter configuration channels 3&4: HP: 50-140 Hz (x5 switch: 250 - 700 Hz) (x50 switch 2,5 - 7 kHz) Filter configuration sub channel (5): LP: 40-125 Hz, Subsonic fixed 25 Hz Grand bass filter : variable 0 - 18 dB (only on sub channel) Variable phase shift control for subwoofers : variable 0 - 180 degrees (only on sub channel) Filter slope : 12 dB
RMS output per channel at 13,8 volts, < 0,1% distortion. Mode : AB Number of channels : 1 ( for subwoofer use ) Output power in 4 ohm : 500 W Output power in 2 ohm : 870 W Output power in 1 ohm : 1200 W S / N ratio, A-weighted : > 100 dB Damping factor : > 200 Input impedance : > 10 kohm Input sensitivity, variable : 0,2 - 7 V Filters : Lowpass: 50-125 Hz. Subsonic: 25 Hz Terminal for external cooling fan : Yes Dual DC-inputs : Yes Phase control 0-180 degrees : Yes Remote sub level control with phase shift : Yes Current draw, idle : 0,6 A Current draw, maximum : 140 A Dimensions W x D x H : 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch) Weight : 6,2 kg ( 13,67 lb)
RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion. Mode : AB Number of channels : 2 Output power in 4 ohm : 2 x 85 W output power in 2 ohm : 2 x 145 W Output power in 1 ohm : 2 x 220 W Output power in 4 ohm bridge mode : 290 W Output power in 2 ohm bridge mode : 450 W S / N ratio, A-weighted : > 100 dB Damping factor : > 200 Input impedance : > 10 kohm Input sensitivity, variable : 0,2 - 7 V Filter, highpass, variable : 20 - 200 Hz Filter lowpass, variable : 50-125 Hz Terminal for external cooling fan : No Current draw, idle : 0,6 A Current draw, maximum : 60 A Dimensions W x D x H : 265 x 240 x 73 mm (10,43 x 9,45 x 2,87 inch) Weight : 3,7 kg ( 8,16 lb)
18 Sound 18NLW9600 Speaker The 18NLW9600 is an extended low frequency 18 inch neodymium high performance transducer. The loudspeaker has been designed for use as a subwoofer component, in either a reflex, bandpass or horn loaded configuration, in high power auditorium or arena loudspeaker systems. For optimum results recommended amplifier should be able to deliver 3600 Watt program power without clipping. Eighteen Sound engineers have obtained the best possible results with today's available materials in terms of clean and undistorted LF reproduction at a ultra high SPL, with the lowest possible power compression figure. The transducer design features include a large displacement suspension system specifically designed for matching the carbon fiber reinforced, straight ribbed cone. Thanks to the Triple Silicon Spider (TSS) technology, the 18NLW9600 is able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. Bl force factor, as w
RMS output per channel at 13,8 volts, 20 Hz - 20 kHz , < 0,1% distortion. Mode : AB Number of channels : 3 Power output in 4 ohm : 2 x 70 Watt + 1 x 265 Watt on mono channel Power output in 2 ohm : 2 x 100 Watt + 1 x 365 Watt on mono channel Frequency range : 10 Hz - 50 kHz S / N ratio, A-weighted : > 100 dB Damping factor : > 200 Input impedance, low level input : > 10 kohm Input impedance, high level input : 330 ohm High level input with auto start function : Yes nput sensitivity, variable : 0,2 - 7 V Grand bass filter : variable 0 - 18 dB (only on sub channel) Variable phase shift control for subwoofers : variable 0 - 180 degrees (only on sub channel) Filter, highpass, variable : 20 - 150 Hz on front channels Filter lowpass, variable : 40-125 Hz on sub channel Subsonic filter : Yes, on sub channel Filter slope : 12 dB/octave Current draw, idle : 0,9 A Current draw, maximum : 70 A Dimensions W x D x H : 385 x 245 x 59 mm (15,15 x 9,65 x 2,33 inch) Weight : 4,4 kg ( 9,7 lb)
